Need help?Do you have a question about the NMC-WOLLARD M60 and is the answer not in the manual?
General| Brand | NMC-WOLLARD |
|---|---|
| Model | M60 |
| Category | Tractor |
| Language | English |
Inspect tractor for damage, check fluid levels, brakes, electrical system, engine, steering, axles, and transmission.
Familiarize with operating controls and instruments before driving the tractor.
Details ignition switch, lights toggle, gear shift lever, accelerator, and brake pedals.
Explains engine hour meter, fuel, oil pressure, voltmeter, coolant, and transmission temp gauges, and fuses.
Steps for starting gasoline, LPG, and diesel engines, including preheater use and checks.
Advice on hard starting, warnings against ether, and battery issues.
Safety precautions to minimize fire or explosion risk when charging a battery.
Details on slow charging (preferred) and fast charging procedures and best practices.
Instructions and safety warnings for jump starting the tractor, especially in cold weather.
Guidance on engine break-in, adjusting speed, and performance at altitude.
Instructions for driving, shifting gears, towing, and safe maneuvering.
Procedure for safely stopping and shutting down the tractor, including brake application.
Location and operation of the master disconnect electrical switch.
Follow this procedure if the brakes fail to stop the tractor.
Notices and instructions for towing the tractor to prevent transmission damage.
Reference to chapter 5 for operation of trailer brake control if equipped.
To Next Page
