PAGE 1-1
CHAPTER 2 MAINTENANCE
NMC-WOLLARD
2021 Truax Blvd. Eau Claire, WI 54703 ● P: 715-835-3151● F: 715-835-6625 ● www.nmc-wollard.com
TML-704H Maintenance Lift Manual No. 310547
SEPTEMBER 01, 2015
1 SERVICING
1. SERVICING
Perform lockout/tagout procedures before adjusting, lubricating cleaning
or otherwise servicing. Failure to do so could result in unexpected startup and could
cause injury or death.
1.1 SAFETY STOP USE
SAFETY STOPS MUST BE ENGAGED before working beneath
the platform or in the engine compartment or for maintenance/repair activities that
involve removing or disconnecting platform lift system hydraulic components.
1. Raise platform until frame rollers are rearward of safety stops.
2. Push operation knobs in and lower platform so frame rollers rest against safety
stops. See gure 1. If the platform were to fall, it will cause serious injury or
death.
FIGURE 1. SAFETY STOPS
Property of American Airlines
To Next Page
Loading...
