14
Treatment summary
•A single beep will sound & a green
light will appear to signal the
beginning of the treatment.
•A double beep will sound and the
green light will turn red to signal the
end of treatment.
•There is an automatic 14-second
pause after each pulse session.
During that time, the red light will
stay on and the On/Off button will
be disabled.
•When you have finished your
treatment, it’s recommended to
use a moisturizer or serum, such as
NEOVA
®
DNA Total Repair™.
Remember
Sometimes, a slight redness appears
on the treatment area. This is an
indication that the no!no! GLOW
treatment is working and will fade
completely after a short while.
Keep these operating instructions for
future reference.
Cleaning instructions
In order to prevent infection,
thoroughly clean the no!no! GLOW
treatment head before and after each
use. Dip a clean piece of gauze or
cloth into rubbing alcohol and gently
To Next Page