15
wipe the treatment head. Be sure
the treatment head is completely dry
before the next use.
Troubleshooting & FAQ
What do I do if…
My no!no! GLOW does not emit
a pulse?
Check the power indicator to make
sure your no!no! GLOW has been fully
charged. Recharge the unit.
I’ve charged my no!no! GLOW, but
it won’t emit a pulse?
Check the charger’s power cord and
plugs for damage. Try another outlet,
the one you were using may not be
working properly. Remember there is
a 14-second pause after each pulse
session. If a problems persists, or one
that is not mentioned occurs, contact
no!no! GLOW service center.
I feel a heat sensation during
treatment?
no!no! GLOW uses advanced
Light & Heat Energy technology,
therefore feeling heat sensation
during treatment is normal. If
the heat sensation becomes too
uncomfortable, stop the treatment,
remove the device from the skin and
allow your skin to cool for several
minutes before continuing.
To Next Page