25
How to no!no!
®
> It is best to glide towards your body against the grain of the hair growth.
However, if it is more comfortable you may glide in other directions, but
always in the direction of the Status Screen.
> Use a STEADY, SMOOTH and EVEN motion. If you move too slowly, the
device will not activate; if you move too fast, you will not achieve optimal
results.
> The Blue Light will be steady when gliding at the proper speed.
A blinking or flickering blue light indicates that you may be moving too
slowly. Once your movement has been adjusted, the blue light will remain
steady.
> Do not press down too hard on your skin.
> You may need to go over an area more than once; 4-6 passes may be
enough. If the skin is not uncomfortably warm, you may continue. If there
is still hair left after buffing and your skin is too warm, wait a few minutes
to return to the area. Try to remove all of the hair.
> Buff after each treatment to remove treated hair left behind.
NOTE: Do not be alarmed when the number of bars change on the Status
Screen. When you first start to glide, the Status Screen will automatically
switch from the Treatment Level display to the Thermicon
®
Tip status display.
Check the icon to determine what information is being displayed.
To Next Page
Loading...
