no!no! PRO - Troubleshooting and Technical Specifications; Troubleshooting

32
Troubleshooting
If the no!no!
®
will not turn on:
> Make sure the device is charged.
> Press and hold the On/Off Button for a few seconds
until the Status Screen appears.
If the no!no!
®
will not glide:
> Make sure the Thermicon
®
Tip is not bent or torn and
is inserted correctly. Replace if necessary.
> Ensure the roller is clean and free of debris.
> Increase gliding speed.
If the Red Light comes on:
> Check if the Thermicon
®
Tip needs to be replaced.
> Restart your no!no!
®
.
> Make sure the device is charged.
If the device is not working properly contact no!no!
®
Customer Support
For more troubleshooting tips go to www.HowToNoNo.com.
The no!no!
®
warranty is only valid if no!no!
®
has been used according to the
instructions in this guide. Retain all receipts, see pages 37-38 for warranty details.