Remark:
• The unit can store up to 20 tracks in the programmable memories. During the programmed
playback, user can still select the “repeat 1/repeat all” functions.
• During playback, if you press STOP button once to stop the playback, the programmed tracks will
be stored. If you want to re-run the programmed tracks, press PLAY/PAUSE button again.
Repeat playback modes (Repeat 1/Repeat all)
Repeat the Current Track
During playback, press the REPEAT button until the icon is displayed so that the current track
can be repeated.
Repeat All Tracks
During playback, press the REPEAT button until icon are displayed. All tracks on the
disc will be repeated continuously.
Return to normal playback
Press the REPEAT button until NO repeat indicator is displayed. The normal playback will be resumed.
Programmed CD playback
This unit can be programmed to play up to 20 tracks in CD mode. Load the music CD disc onto the CD
compartment (without pressing the “ P
LAY/PAUSE” button)
1. Press PROG button once in the stop mode. “PROG” icon and the selected track “00”will be shown
on the display and blinking.
2. Press the SKIP buttons to select the desired track to be programmed.
3. Press PROG button again to save the selected track.
4. Repeat steps 2-3 to program up to 20 tracks.
5.
Press the PLAY/PAUSE button to play the programmed tracks after programming is completed.
The “P ” icon will be displayed during the programmed playback.
6. To clear program and resume normal playback, press the STOP button twice during playback, or
open the CD door, or change to other modes to clear the programmed tracks
1
EN - 7
CD & MP3 DISC OPERATION
To Next Page
Loading...