Noblex CDR1929BT - USB & SD Card Operation; Source Selection and Insertion; USB;SD Playback Controls

To Next Page

To Previous Page

SWITCH TO USB OR SD CARD MODE

USB & SD CARD OPERATION

REPEAT PLAY

1. During playback, press REPEAT button once, icon will appear on the LCD.

It can keep repeat the current track.

2. To repeat the Folder, press REPEAT button twice,

will

appear on the LCD.

3. To repeat all tracks in disc, press REPEAT button again, will appear on the

LCD.

4. To clear the REPEAT function, press REPEAT button again, all icon will disappear

on the LCD.

INSERTING USB FLASH DRIVE OR SD CARD

1. Insert a USB flash driver into the USB socket OR SD card into SD card slot on the top

of your boombox

2. Make sure that USB or SD Card mode is selected as the audio source.

3. Press PLAY/PAUSE to start playback.

PLAY/PAUSE

1. To start playing, press the PLAY/PAUSE button once, the currently track number and

PLAY indicator will appear on the screen. (“USB” or “CARD” will be shown on the LCD).

2. To pause, press PLAY/PAUSE button, the PLAY incon will flash.

3. To resume play, press the PLAY/PAUSE button again.

STOP

If the STOP button is pressed in the course of playing, it will stop playback.

SKIP PLAY

In stop or playback mode, you can skip up or down to a specific track by pressing the

forward or back SKIP Buttons.

You can press and hold the SKI P buttons

( SEARCH )

to locate a specific point on a

track. The system will search at high speed in

the forward or reverse direction. By releasing

the button, normal play will be resumed.

EN - 8

Press SOURCE button to switch to USB or SD Card mode. “USB” or “CARD” icons will be

shown on LCD display.

FOLDER