Need help?Do you have a question about the NOCO Genius GBX75 and is the answer not in the manual?
General| Battery Type | Lithium-ion |
|---|---|
| Recondition Mode | Yes |
| Cold Weather Mode | Yes |
| Internal Battery | Yes |
| USB-A Output | 2.1A |
| USB-C Input/Output | 5V, 3A |
| Operating Temperature | -4°F to 140°F (-20°C to 60°C) |
| Charging Temperature | 32°F to +104°F |
| Storage Temperature | -4°F to +122°F (-20°C to +50°C) |
| Charging Current | 3A |
| Supply Voltage | 12V |
| Display | LED Indicator |
| Warranty | 1 Year |
Critical safety information for product operation, including risks of shock, explosion, or fire.
General welcome message and list of included components for the NOCO GB70.
Provides phone, email, and mailing address for customer support.
Details the features and capabilities of the GB70 ultra-compact jump starter.
Charge the GB70 before use. Verify battery voltage and polarity for connection.
Verify battery, connections, turn off vehicle loads, and press power button to begin.
Attempt to start. Wait if needed. Avoid consecutive attempts; allow rest periods if unsuccessful.
After vehicle starts, disconnect battery clamps and remove the GB70 unit.
GB70 detects batteries down to 2-volts; Boost LED 'Off' indicates no detection.
Feature to force jump start function 'On' for batteries below 2-volts.
Use with extreme care; disables safety features. Ensure correct polarity and avoid clamp contact.
GB70 has four LEDs (25%, 50%, 75%, 100%) indicating internal battery state-of-charge.
Details solid/pulsing states of Red, Yellow, Green LEDs for battery charge levels.
Explains LED behavior during GB70 battery recharging.
Details error conditions like reverse polarity, low voltage, and overheating with LED feedback and solutions.
Instructions for charging the GB70 using 12V AUX plug or USB port.
Provides estimated recharge times for GB70 based on charger type and rating.
Instructions for using the GB70 to charge external USB devices and power 12V devices.
Details the seven light modes and how to cycle through them using the power button.
Lists key technical details including battery, current, temperature, dimensions, and weight.
The GB70 automatically turns off after seven hours to save energy.
Shows the charge level of the GB70's internal battery using LEDs.
Describes the function of the Red Error LED and White Power LED.
Details the Power Button, Manual Override Button, and Light Mode Button functions.
To Next Page