EasyManua.ls Logo

NOCO Genius Genius 2D - Page 3

NOCO Genius Genius 2D
28 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
EN
Product contains magnetic components that may emit electromagnetic fields, which may interfere with pacemakers, defibrillators, or other medical devices. Consult
with your physician prior to use if you have any medical device including pacemakers. If you suspect the product is interfering with a medical device, stop using the
product immediately and consult your physician. Medical Conditions. If you have any medical condition that you believe could be aected by product, including
but not limited to; seizures, blackouts, eyestrain or headaches, consult your physician prior to use of product. Cleaning. Power o the product before attempting any
maintenance or cleaning. Clean and dry product immediately if it comes in contact with liquid or any type of contaminant. Use a soft, lint-free (microfiber) cloth. Avoid
getting moisture in openings. Explosive Atmospheres. Obey all signs and instructions. Do not operate product in any area with a potentially explosive atmosphere,
including fueling areas or areas which contain chemicals or particles such as grain, dust or metal powders. High-Consequence Activities. This product is not
intended for use where the failure of the product could lead to injury, death or severe environmental damage. Radio Frequency Interference. Product is designed,
tested, and manufactured to comply with regulations governing radio frequency emissions. Such emissions from the product can negatively aect the operation of
other electronic equipment, causing them to malfunction. Model Number: Genius 2D This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that
may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required
to correct the interference at his/her own expense.
Charging Modes.
The Genius 2D has two (2) automatic modes, and will begin charging when both the battery and power are connected. Do not operate the charger until you confirm
the Genius 2D charger is compatible with your battery type and voltage. Below is a brief description:
How To Use
Mode Explanation
12V NORM
Standby
No Power
14.5V | 2000mA | Up To 40Ah Batteries | Maintain all sizes
The charger is connected to AC power but no battery is detected, and the charger is not charging. Energy Save is activated during this mode,
drawing microscopic power from the electrical outlet.
For charging 12-volt Wet Cell, Gel Cell, Enhanced Flooded, Maintenance-Free, Calcium batteries and AGM.

Related product manuals