NOCO Genius Genius 5 User Manual

User Guide & Warranty
DANGER
READ AND UNDERSTAND ALL SAFETY INFORMATION BEFORE USING THIS PRODUCT. Failure to
follow these safety instructions may result in ELECTRICAL SHOCK, EXPLOSION, FIRE, which may
result in a SERIOUS INJURY, DEATH, or PROPERTY DAMAGE.
Electrical Shock. Product is an electrical device that can shock and cause serious injury. Do not cut power
cords. Do not submerge in water or get wet.
Explosion. Unmonitored, incompatible, or damaged batteries can explode if used with product. Do not
leave product unattended while in use. Do not attempt to jump start a damaged or frozen battery. Use
product only with batteries of recommended voltage. Operate product in well ventilated areas.
Fire. Product is an electrical device that emits heat and is capable of causing burns. Do not cover product.
Do not smoke or use any source of electrical spark or fire when operating product. Keep product away from
combustible materials.
Eye Injury. Wear eye protection when operating product. Batteries can explode and cause flying debris.
Battery acid can cause eye and skin irritation. In the case of contamination of eyes or skin, flush aected
area with running clean water and contact poison control immediately.
Explosive Gases. Working in the vicinity of a lead-acid is dangerous. Batteries generate explosive gases
during normal battery operation. To reduce risk of battery explosion, follow all safety information instructions
and those published by the battery manufacturer and manufacturer of any equipment intended to be used
in the vicinity of battery. Review cautionary markings on these products and on engine.
GENIUS5
For more information
and support visit:
www.no.co/support

NOCO Genius Genius 5 Specifications

General

Model	Genius 5
Type	Battery Charger
Input Voltage	100-240V AC
Input Frequency	50-60Hz
Output Current	5A
IP Rating	IP65
Output Voltage	6V or 12V
Battery Types Supported	Lead-acid and lithium
Features	reverse polarity protection
Charging Modes	Maintenance
Safety Features	Overcharge Protection, Short Circuit Protection, Overheat Protection

Summary

Safety Information

Critical Danger Warnings

Essential warnings about electrical shock, explosion, fire, and injury risks associated with product use.

Important Safety Warnings

Product Overview and Getting Started

Introduces the GENIUS5 charger and guides initial setup, including battery compatibility.

Personal Safety and Precautions

Covers personal protection, handling minors, avoiding choking hazards, and general care during operation.

Handling, Storage, and Environment

Details safe product handling, storage conditions, operating location, temperature limits, and compatibility.

Specific Safety Considerations

Addresses safety related to medical devices, explosive atmospheres, high-consequence activities, and radio frequency interference.

How To Use

Charging Modes Explained

Provides an overview of the seven distinct charging modes available on the GENIUS5 charger.

Advanced Charging Mode Details

Elaborates on specific modes like 6V, 12V Lithium, Force Mode, and 12V Repair, including usage cautions.

Connecting and Charging Procedures

Guides users through connecting the charger to the battery and the steps to begin the charging process.

Charging Times

Estimated Charge Durations

Lists estimated charging times for various battery capacities and voltages, considering depth of discharge.

Understanding Charge LEDs

Charge Status Indicator Lights

Explains the visual cues from LEDs indicating the battery's current charge level and maintenance status.

Understanding Error LEDs

Error Code Indicator Lights

Details the meaning of error LEDs and provides guidance on troubleshooting common issues.

Technical Specifications

Product Technical Details

Presents key technical specifications of the charger, including voltage, power, dimensions, and compatibility.

3 Year Hassle-Free Warranty

Warranty Terms and Conditions

Covers the duration, scope, and limitations of the 3-year hassle-free warranty provided by NOCO.

Warranty Claim Process

Outlines the procedure for making a warranty claim, including necessary documentation and product registration.