NOCO Genius GENIUS2D User Manual

2
D
www.no.co/support
User Guide & Warranty
DANGER
READ AND UNDERSTAND ALL SAFETY INFORMATION BEFORE USING THIS PRODUCT. Failure to
follow these safety instructions may result in ELECTRICAL SHOCK, EXPLOSION, FIRE, which
may result in a SERIOUS INJURY, DEATH, or PROPERTY DAMAGE.
Electrical Shock. Product is an electrical device that can shock and cause serious injury. Do not cut
power cords. Do not submerge in water or get wet.
Explosion. Unmonitored, incompatible, or damaged batteries can explode if used with product. Do not
leave product unattended while in use. Do not attempt to charge a damaged or frozen battery. Use product
only with batteries of recommended voltage. Operate product in well ventilated areas.
Fire. Product is an electrical device that emits heat and is capable of causing burns. Do not cover product.
Do not smoke or use any source of electrical spark or fire when operating product. Keep product away
from combustible materials.
Eye Injury. Wear eye protection when operating product. Batteries can explode and cause flying debris.
Battery acid can cause eye and skin irritation. In the case of contamination of eyes or skin, flush aected
area with running clean water and contact poison control immediately.
Explosive Gases. Working in the vicinity of a lead-acid is dangerous. Batteries generate explosive
gases during normal battery operation. To reduce risk of battery explosion, follow all safety information
instructions and those published by the battery manufacturer and manufacturer of any equipment intended
to be used in the vicinity of battery. Review cautionary markings on these products and on engine.
For more information
and support visit:

NOCO Genius GENIUS2D Specifications

General

Charging Current	2A
IP Rating	IP65
Input Voltage	100-240VAC
Output Voltage	12V
Battery Types	Lead-Acid (Wet, Gel, MF, CA, EFB, AGM)
Safety Features	Reverse polarity protection, Overcharge protection, Short-circuit protection
Compatibility	All types of 6V and 12V lead-acid batteries

Summary

DANGER: Safety Precautions

Electrical Shock Hazard

Product is an electrical device that can shock and cause serious injury. Do not cut power cords.

Explosion Hazard

Unmonitored, incompatible, or damaged batteries can explode if used with product. Do not charge damaged batteries.

Fire Hazard

Product emits heat and is capable of causing burns. Do not cover product. Keep away from combustible materials.

Eye Injury Risk

Wear eye protection. Batteries can explode causing flying debris. Battery acid causes irritation.

Explosive Gases Hazard

Working near lead-acid batteries is dangerous due to explosive gases. Follow safety instructions.

Important Safety Warnings

Product Use, Handling & Environment

About Genius 2D, getting started, handling care, avoiding damage, operating temperature, and storage.

Location, Compatibility & Medical Devices

Proper location, ventilation, compatibility, and warnings for medical devices like pacemakers.

Operational Precautions

Cleaning, avoiding explosive atmospheres, high-consequence activities, and RF interference.

How To Use

Charging Modes Explained

Explains the Standby and 12V NORM charging modes for the Genius 2D.

On-Board Mounting Instructions

Steps for securing the charger bracket to a vehicle's chassis for mounting.

Connecting to the Battery

Detailed steps for connecting the charger to the battery, including polarity and grounding.

Begin Charging Process

Steps to verify connections and initiate the charging process after setup.

Operation Details

Understanding Charge LEDs

Explains the meaning of the Pulsing Red, Solid Green, and Pulsing Green Charge LEDs.

Understanding Advanced Diagnostics

Explains error conditions indicated by Error, Hot, and Standby LEDs.

Technical Specifications & Warranty

Estimated Charging Times

Provides estimated time to charge batteries based on size and depth of discharge.

Product Technical Specifications

Lists input voltage, efficiency, power, charging current, dimensions, and weight.

3 Year Hassle-Free Warranty

Details the warranty terms, conditions, exclusions, and claim process.