5
BEFORE FIRST USE
GET STARTED - HOW TO USE
• Remove all packaging.
• Check the intactness of the appliance and completeness of the accessories.
• Remove any stickers or labels from the appliance.
• Thoroughly clean the accessories with hot water, mild detergent and a non-abrasive sponge.
• Wipe the inside and outside of the appliance with a damp cloth.
NOTE: NEVER WASH OR SUBMERGE THE MAIN UNIT IN WATER.
Connect the appliance to a power source, it then enters standby mode with a beep.
All the indicators on the control panel will flash once.
POWER ON / OFF
• Touch the power button to turn on the appliance and it will confirm with a beep.
All the indicators on the control panel will light up.
• Touch it again to turn o the appliance.
LIGHT CONTROL
When the appliance is turned on, touch the light button to turn on / o the light.
PREHEAT THE OVEN
When the appliance is turned on, touch the preheat button to preheat it if needed.
Note:
• Do not place anything above the air fryer, because this can interfere with the cooking program.
• An air fryer is not a classic fryer. Do not fill with oil, fats for frying or any liquids.
• When opening the window of the air fryer, be aware of the hot steam.
CHOOSE THE COOKING MODE
• When the appliance is on, touch the mode button to choose the desired cooking mode. The corresponding mode
indicator will light up. The LCD-display will show the cooking temperature and cooking time simultaneously with the
latter counting down by the minute.
• When mode is selected, touch the start / pause button or press the confirm button to start the cooking process.
The working indicator will keep flashing once cooking is started
• If the window is opened during a cooking process, the oven will pause the cooking. Close the window and the
appliance will resume working from the previous remaining time and temperature.
NOTE: TOUCH THE ROTATING BUTTON TO START ROTATING IF THE ROTISSERIE SHAFT
OR SKEWER RACK IS USED FOR MORE EVEN RESULT.
To Next Page