Menu functions
Copyright © 2004 Nokia. All rights reserved. 13
2. Key in the message. The number
of available characters and the
current part number are shown
on the top right of the display.
3. When the message is complete,
press Options, select Send,
key in the recipient’s phone
number, and press OK.
If you want to send the message
to several people, select Sending
opts and Send to many, scroll to
the first recipient, and press
Send. Repeat this for each
recipient.
To send a message to a
predefined distribution list, select
Sending opts and Send to list. To
define and edit distribution lists,
see ”Distribution lists” on page
15.
Other options are: Use template,
Insert options, Small fonts or
Large fonts, Clear text,
Dictionary, Instructions, Exit
editor, Sending profile (refer to
”Message settings” on page 16),
Save message and Delete.
Note: When sending
messages via the SMS
Network Service, your
phone may display the
words "Message sent". This
is an indication that the
message has been sent by
your phone to the message
centre number
programmed into your
phone. This is not an
indication that the message
has been received at the
intended destination. For
more details about SMS
services, check with your
service provider.
Reading a text message
(Inbox)
When you have received text
messages in standby mode, the
number of new messages as well as a
are shown on the display.
1. Press Read to view the
messages immediately.
To view the messages later, press
. Go to the Inbox menu
(Menu 01-2) when you want to
read the messages.
To Next Page
Loading...
Need help?
General
