Settings
45
4. Scroll to the type of forwarding that matches the feature code you entered
(for example, Divert if busy), select Activate.
The activated feature code is now stored in your phone, and you are returned
to the Feature code: prompt. Continue entering other feature codes (for
example, *900 to cancel Divert if busy), or press the end key to return to the
standby mode.
When you enter a network feature code successfully, the feature becomes visible
in the Network services menu.
Own number selection
In the standby mode, select Menu > Settings > Call settings > Network
services > My number selection. This feature is carrier dependent.
Call forwarding
Call forwarding tells your network to redirect incoming calls to another number.
Call forwarding is a network service and may not work the same in all networks,
so contact your wireless provider for availability.
Activate
This is a network service. All options listed may not appear in the display. Contact
your wireless provider for more information.
1. In the standby mode, select Menu > Settings > Call settings > Network
services > Call divert and one of the following options:
Divert all calls—Forwards all calls to the number you specify.
Divert if busy—Forward incoming calls when you are in a call.
Divert if not answered—Forward incoming calls to another number if you are
unable to answer. You can set a delay before forwarding takes place.
Divert if out of reach—Forward incoming calls when your phone is off.
Cancel all diverts—Cancel any call forwarding options you have set.
2. Select Activate.
3. Enter the number to which your calls, data, or other information are
forwarded, and select OK.
Cancel
In the standby mode, select Menu > Settings > Call settings > Network
services > Call divert > Cancel all diverts.
Simatai_User_Guide_nonRUIM_clean.fm Page 45 Wednesday, December 21, 2005 5:20 PM
To Next Page
Loading...
