Settings
51
Off immediately turns off the phone lock feature.
Call not allowed is displayed if you attempt to place a call while the phone is
locked.
To answer a call with phone lock on, select Answer or press the call key.
Allowed phone number when phone locked
When phone lock is on, the only outgoing calls that can be made are to the
emergency number programmed into your phone (for example, 911 or other
official emergency number) and the number stored in the Allowed number when
phone locked location.
1. In the standby mode, select Menu > Settings > Security settings > Access
codes > Allowed number when phone locked.
2. Enter the lock code and select OK.
3. Enter the phone number, or select Search, recall the number from the phone
book, and select OK.
Change the lock code
The lock code allows you to access the phone when it is locked.
1. In the standby mode, select Menu > Settings > Security settings > Access
codes > Change lock code.
2. Enter the current lock code (default is 1234), and select OK.
3. Enter the new lock code (4 characters), and select OK.
4. Enter the new lock code again, and select OK.
When you change your lock code, make sure you store it in a safe place, away
from your phone. Avoid entering access codes similar to emergency numbers to
prevent accidental emergency calls.
The security code can be used for the lock code.
Change the security code
The security code is needed for tasks such as deleting all contacts or restoring
factory settings.
1. In the standby mode, select Menu > Settings > Security settings > Access
codes > Change security code.
2. Enter the current security code (default is 12345), and select OK.
3. Enter the new security code (5 characters), and select OK.
Simatai_User_Guide_nonRUIM_clean.fm Page 51 Wednesday, December 21, 2005 5:20 PM
To Next Page
Loading...
