[ 54 ]
• Contact your service provider to get the e-mail address and gateway
number for your phone, and for more information on using e-mail.
Send an e-mail message
1
Press Menu 1-2
(Menu
>
Messages
>
Write e-mail).
Note:
If you get a prompt asking you to enter your e-mail
gateway number, you must obtain this number from your
service provider.
2
At the prompt, enter your recipient’s e-mail address or press Find to
look through and select a saved e-mail address from your phone list.
Press OK.
3
At the prompt, enter a subject for your e-mail message. (You are not
required to enter a subject.) Press OK when you are finished.
Note:
Predictive text is not available when entering an e-mail
address or a subject line for your e-mail.
4
A screen will appear allowing you to enter the text of your message.
Your total message, including the address and subject line, can be up
to 160 characters. There is a running total of remaining characters in
the top right corner of the screen.
5
After you finish entering the text of your e-mail, press Options and
scroll to Send, then press Select.
Receive an e-mail message
When you receive an e-mail message, the phone makes a sound and
displays Message received and the indicator in the upper left corner
of the screen.
To read the message, press Read.
When reading a received e-mail message, you can choose other options,
such as Reply and Forward. See “Options when working with messages”
on page 47.
To Next Page
Loading...
