• PIN2 code: This code is supplied with some SIM cards and is required
to access certain services, such as call cost settings. If you enter the
PIN2 code incorrectly three times in succession, PIN2 code blocked
appears on the display, and you will be asked for the PUK2 code.
Change the security code, PIN code and PIN2 code in Change access
codes in the Security settings menu (see page 33). Keep the new codes
secret and in a safe place separate from your phone.
• PUK and PUK2 code: These codes may be supplied with the SIM card.
If this is not the case, contact your local service provider.
x Copyright © 2004 Nokia. All rights reserved.
To Next Page
Loading...
