Menu functions
40 Copyright © 2004 Nokia. All rights reserved.
• To activate the profile for a certain amount of time, select Timed
and set the end time. When this time expires, the previous profile
that was not timed, becomes active.
• To change the profile settings, select Personalise. Select the setting
that you want to change and make the change.
Select Light sequences to activate the display and keypad lights for
certain functions. For more information, see "Light alerts" on page
xii.
For information on the other settings, see "Tone settings" on page
40. With Profile name you can rename the selected profile. The
General profile cannot be renamed.
The name of the currently active profile is shown in standby mode, except
when the General profile is active. If the profile is timed, is shown in
front of its name.
Tip: To change the profile quickly in standby mode, press the power
key and select the profile that you want to activate.
Tone settings
You can change the tone and vibrator settings of the currently selected
profile. The same settings can also be found in the Profiles menu, see page
39.
To access this menu: Press Menu in standby mode, and select Settings
and Tone settings. Select
To Next Page
Loading...
