15
CONFIDENTIAL
Copyright © 2007 NOKIA. All rights reserved.
2660 RM-292/RM-293
Page (30) ISSUE 1
Service Manual Level 1&2
UPPER BLOCK ASSEMBLY HINTS 14.
1. Nokia 2660 Upper Block Assembly Hints.
2. Align the LCD PM 96X68 exactly with the marking corner on
the UI PWB ASSY and close the LCD connector.
3. Place the UI PWB ASSY onto the B-COVER paying attention to
the guide pins of the B-COVER.
4. Always use new screws when assembling the unit.
5. Tighten the screws to the torque of 15Ncm in the order
shown.
6. Finally t the new SCREW COVER.
To Next Page
Loading...
