39Copyright © 2005 Nokia. All rights reserved.
Options during a call
Many of the options that you can use during a call are network services. Select
Options during a call for some of the following options: Mute or Unmute, Answer,
Reject, Swap, Hold or Unhold, Activate handset, Activate loudsp., or Activate
handsfree (if a compatible Bluetooth headset is attached), End active call or End
all calls, New call, Conference, and Transfer. Select:
• Replace - to end an active call and replace it by answering the waiting call.
• Send DTMF - to send DTMF tone strings, for example, a password. Enter the
DTMF string or search for it in Contacts. To enter a wait character (w) or a
pause character (p), press
*
repeatedly. Press OK to send the tone.
Tip: You can add DTMF tones to the Phone number or DTMF fields in a
contact card.
■ Push to talk
Select Menu→Push to talk.
Push to talk over cellular is a two-way radio service (network service) available
over a GSM/GPRS cellular network. Push to talk provides direct voice
communication connected with pressing the Push to talk key.
You can use push to talk to have a conversation with one person or with a group
of people having compatible devices. When your call is connected, the person or
group you are calling does not have to answer the phone. Besides the GPRS
counters, the phone registers only one-to-one calls in the recent calls lists in Log.
The participants should confirm the reception of any communications where
To Next Page
Loading...
