PAGE 10 (17) Approved 1.0
Nokia Mobile Phones Customer Care E&A
SQX 00443-en MWy
Technical Services, Repair Concepts Confidential 22.05.2002
5. DISASSEMBLY INSTRUCTIONS
Release the A-Cover from the bottom side of the
unit.
Take away the A-Cover.
Also, protect the inner part of the window with a
foil. The Keymat is loose inside the A-Cover.
Open the six screws in the predefined order with a
Torx 6 driver. When re-assembling, the reverse
order has to be taken with a torque of 28 Ncm.
When releasing the side clips of the D-Cover you can
use the SRT-6.
This is the second clip.
Take away the Display Assembly (UI module) and
avoid touching the pads with your fingers.
There are two snaps on each side of the Metal
Frame.
Service Manual 3510 Level 2 Copyright 2002 © Nokia Corporation
To Next Page
Loading...
