Nokia 3710 fold - Personalisation options

Nokia 3710 fold
RM-509/RM-510
Service Manual Level 1&2
23
Confidential
 Copyright © 2009 NOKIA  All rights reserved
Version 2.0 ISSUE 1
13) Use the tweezers to carefully connect the MCX
CABLE connector. While closing the connector, be
careful not to damage the cable or the connector.
14) Place a new LCD module into the B-COVER. Make
sure the protective film of the secondary display is
aligned correctly.
15) Use the SS-93 to secure the LCD connector.
While closing the connector, be careful not to
damage any nearby components.
16) Replace the B-COVER TRIM ASSY with a new one.
Unwrap a new EARPIECE NET. Place the EARPIECE
NET with the tweezers.
17) Peel off the protective film from the new
DISPLAY WINDOW ASSY.
18) Start placing the DISPLAY WINDOW ASSY from
the top side of the assy. Press it firmly to activate
the adhesive.