Nokia 3710 fold
RM-509/RM-510
Service Manual Level 1&2
24
Confidential
Copyright © 2009 NOKIA
All rights reserved
Version 2.0
ISSUE 1
19) Remove the protective film from the LCD 20) Attach first the top side of the B-COVER TRIM
ASSY to the B-COVER.
21) Press the edges of the B-COVER TRIM ASSY firmly
to attach the side clips correctly.
22) Place the MCX COVER ASSY with the tweezers.
Check the correct alignement of these clips.
23) Tighten the four TORX + size 4 screws to the
torque of 15 Ncm in the order shown. Remember to
use new screws.
24) Remove the protective film from the secondary
display.