Nokia 5160 - Calling Card Calls

35
Standard method
1
Dial the feature code followed by the number you want
to call.
2
Press
&DOO
.
Example: If the feature code to hide your number is *67 and
the number you want to dial is (214) 555-1234, dial
-9:5478884567
, then press
&DOO
.
Menu method
You can save the feature code given by your service provider
so that
6HQG RZQ Q XP EHU
appears in your phone’s menu,
and then use
0HQX
4 4 5 to use this feature. See ‘Network
feature setting’ on page 29.
This feature must be activated before each call.
<HV
displays your number to the person you are calling.
1R
prevents your number from being shown to the person
you are calling.
Calling card calls
Before you can make a call using a calling card, you have to
enter your calling card information into the phone. See
‘Calling card set-up’ on page 19.
To make a call using a calling card:
1
Enter the phone number, including any prefix (such as 0
or 1) that your calling card may require when you make
a calling card call. See your calling card for instructions.
2
Press and hold
&DOO
for a few seconds until your phone
displays
&DUG FDOO
.
3
Your phone displays
:DLW IRU WRQH/ WKHQ SUHVV 2.
. Wait
for the tone, then press
2.
.
4
Your phone displays
:DLW IRU WRQH/ SUHVV 2. DJDLQ
. Wait
for the tone again, then press
2.
.