21
Clock
Your phone has an internal clock that
can be displayed on the start screen.
The clock must be set in order for call
times to be recorded (see ‘Call log’ on
page 42).
If you remove the battery for longer than a couple of
seconds, the time will be lost. The next time you turn on the
phone, you will be asked to enter the time.
Selecting time format
Use
0HQX
7 2 3 to set the clock’s format to
570KRXU
or
DP2
SP
.
Setting the time
Use
0HQX
7 2 2 to enter the current time. Use two digits for
both hours and minutes (for example, enter 1:30 as
3463
). If
the clock’s time format is set to
DP2SP
, you will be asked to
choose
DP
or
SP
.
Note: The key does not work on this screen. If you
make a mistake, re-enter all four digits.
Displaying or hiding the clock
Press
0HQX
7 2 1 to display the clock on the phone’s screen
if it is currently hidden, or vice versa.
When the clock is displayed and the
time format is set to
DP2SP
, a black
square will appear next to the time
indicating a.m. or p.m.
36=48
36=48
3:15 a.m.
3:15 p.m.
To Next Page
Loading...
