34
Making calls using one-touch dialing
Press and hold a key (2 through 8) for a few seconds to call
the number assigned to it. Your phone finds the phone
number, displays it briefly, then dials it.
Choosing an outgoing line
Some networks offer a service that allows you to have more
than one phone line—for example, one for work-related calls
and one for personal calls. If you have subscribed to this
service and your SIM card supports this feature, you can use
Menu
4 1 4 to select
Line 1
or
Line 2
for outgoing calls.
(You can receive calls on either line at any time.)
Tip:
You can also press and hold until the phone
displays
Change the phone line?
Press
OK
to switch
lines or to cancel.
Voice messages, call timers, and call forwarding work
separately on the second phone line. See the individual
entries regarding these features for more information.
Line numbers on your phone’s screen
When Line 1 is selected for outgoing calls, appears on
the start screen. When Line 2 is selected for outgoing calls,
appears on the start screen.
When you receive a call on the line that is not selected for
outgoing calls, that line number flashes on your phone’s
screen. Once you have answered the call, the number of the
outgoing line is displayed again.
Calling card calls
Before you can make a call using a calling card, you have to
enter your calling card information into the phone. See ‘Calling
card set-up’ on page 16.
To make a call using a calling card:
1
Enter the phone number, including any prefix (such as 0
or 1) that your calling card may require when you make
a calling card call. See your calling card for instructions.
To Next Page
Loading...
