Nokia 5300 - Configuration Settings; Web

Push to talk
Copyright © 2007 Nokia. All rights reserved. 57
up) key, the selected function is
performed.
Show my login status — to enable or
disable the sending of the login
status.
PTT status in startup > Yes or Ask
first — to set the phone to
automatically connect to the PTT
service when you switch the phone
on.
PTT when abroad — to switch the PTT
service on or off when the phone is
used outside of the home network.
Send my PTT address > No — to hide
your PTT address from channel and
one-to-one calls.
■ Configuration settings
You may receive the settings for
connecting to the service from your
service provider. See ”Configuration
settings service” p. xii. You can enter
the settings manually. See
”Configuration” p. 40.
To select the settings for connecting
to the service, select Menu > Push
to talk > Configuration sett.. Select
from the following options:
Configuration — to select a service
provider, Default, or Personal config.
for PTT service. Only the
configurations that support the PTT
service are shown.
Account — to select a PTT service
account contained in the active
configuration settings.
Other parameters are PTT user name,
Default nickname, PTT password,
Domain, and Server address.
■ Web
Select Menu > Push to talk > Web to
access the Internet site of your PTT
provider.