PAMS Technical Documentation UI Module Troubleshooting
NPM-5
,VVXH 1RNLD&RUSRUDWLRQ 3DJH
• U201 NAND Memory
• U601 Audio Codec
• U602 Audio Routing Select
• U801 FMR
,WLVLPSRUWDQWWKDWDVHUYLFHSHUVRQQHOKDVDOLVWRIYDOLG¦OLYH§)0FKDQQHOIRUOLVWHQLQJ
YHULILFDWLRQ7KHVHGLDJQRVWLFVWHSVGRQRWUHTXLUHDQ\VLJQDOJHQHUDWRU
Diagnostic Tests:
• Perform test on page 68 – Line-In Recording Function to verify the recording
path is good.
• Perform test on Chapter on “FMR Function” – FMR Function to verify the FMR
path is good.
• Check operating current during recording mode (Table 8, “UI current consump-
tion in normal conditons,” on page 73).
• Check the Audio Routing Select, U602-Pin10 and U602-Pin9 are routed cor-
rected (Table 10, “Audio routing select,” on page 73).
• Verify recorded music file in the NAND using NAM.
3KRQH$XGLR5RXWLQJ)XQFWLRQ
3KRQHDXGLRLVDYDLODEOHLQ8,HLWKHUDVRQERDUGHDUSLHFHRUDVH[WHUQDOYLDVWHUHR
KHDGVHW
)RURQERDUGSKRQHDXGLRHQVXUHWKHHDUSLHFHRQWKHGLVSOD\PRGXOHKDVSURSHUFRQWDFW
WRWKH8,SDGV
)RUH[WHUQDOSKRQHDXGLR
Diagnostic Tests:
• Check the stereo headset has proper contact with the UI module.
• Connect Stereo headset and check signal line ST_DET @ U301-Pin20
(Table 9, “Accessories connection indication,” on page 73)
• Connect HDC-5 and check signal line HDC5_INT @ U301-Pin23 (Table 9,
“Accessories connection indication,” on page 73)
• Check the Audio Routing Select, U602-Pin10 and U602-Pin9 are routed cor-
rected (Table 9, “Accessories connection indication,” on page 73).
• Check for analog signal activities at both sides of C641 and C642.
To Next Page
Loading...
Need help?
General
