©2002 Nokia Corporation. All rights reserved.
Menu functions
51
Menu functions
To access this menu: In standby mode, press (Menu), scroll to Tones, and press (Select).
• Ringing tone: You can select the tone that you hear when you receive a call.
• Ringing volume: You can set the volume level for the ringing and message alert tones.
• Incoming call alert: You can select the way the phone notifies you of incoming voice calls. For
example, when Off is selected, the phone remains silent when you receive a call and is shown in
standby mode.
• Message alert tone: You can set the tone that you hear when you receive a text message.
• Keypad tones: You can set the volume for keypad tones.
• Warning tones: You can set the phone to sound tones, for example, when the battery is running out
of power.
• Vibrating alert: You can set the phone to vibrate when you receive a call or a text message.
• Screen saver: You can select the picture that is displayed in standby mode after a specified time
(’timeout’). You can also use animated pictures as screen savers.
Note, however, that the use of an animated picture as a screen saver consumes power, so it reduces
the operation time of your phone.
For downloading animated pictures, see the View picture function in Browsing the pages of a WAP
service on page 76.
■ Settings (Menu 6)
In this menu, you can adjust various settings of the phone. You can also reset some
menu settings to their default values.
To access this menu: In standby mode, press (Menu), scroll to Settings, and press (Select).
To Next Page
Loading...
Need help?
General
