Push to talk
90
To select the settings for connecting to the service, select Menu > Push to talk >
Config. settings and one of the following options:
Configuration — to select a service provider, Default, or Personal config. for PTT
service. Only the configurations that support the PTT service are shown.
Account — to select a PTT service account in the active configuration settings.
You can also select from other available options.
To edit the PTT settings for use, select Menu > Push to talk > PTT settings
and one of the following options:
1 to 1 calls > On — to set the phone to allow the reception of one-to-one calls.
To make but not receive one-to-one calls, select Off. The service provider may offer
some services that override these settings. To set the phone to first notify you of
incoming one-to-one calls with a ringing tone, select Notify.
PTT key default function > Open contact list, Open channel list, Call contact/group,
or Call PTT channel
Show my login status > Yes — to enable the sending of the login status
PTT status in startup > Yes or Ask first — to set the phone to automatically connect
to the PTT service when you switch on the phone
Push to talk when roaming — to switch the PTT service on or off when the phone
is used outside of the home network
Send my PTT address > No — to hide your PTT address from calls
6085.EN_ESv1_9253443.book Page 90 Saturday, December 2, 2006 8:26 AM
To Next Page
Loading...
