[ 52 ]
• To send the business card via IR, make sure the receiving device
is set up to receive data via its IR port and select
Via infrared
.
• To send the business card as a message, select
Via text message
.
3
If you selected
Via infrared
(and the entry has multiple sub-entries)
scroll to
Primary no.
or
All details
and press
Select
. Your business
card is sent.
or
If you selected
Via text message
(and the entry has multiple sub-
entries), scroll to
Primary no.
or
All details
and press
Select
.
4
Enter the number for your recipient or press
Find
to retrieve a number
from your Phone book.
5
Press
OK
and the business card is sent.
• 1-TOUCH DIALING
You can associate any entry in your Phone book with keys
2
through
9
and then dial those entries by pressing and holding the assigned key.
Assign a key to 1-touch dialing
1
At the Start screen, press
Names,
scroll to
1-touch dialing
and
press
Select
.
2
Scroll to any empty slot and press
Assign
.
3
Enter the number (including the area code) and press
OK
, or press
Find
to retrieve a number from your Phone book.
4
Enter a name for the number and press
OK
.
• If 1-touch dialing is off, the phone displays a prompt asking if you’d
like to turn 1-touch dialing on. Press
Yes
to activate 1-touch dialing.
5
The entry appears in the slot you’ve assigned.
Make a call with 1-touch dialing
• Press and hold the key to which an entry has been assigned. Your
phone dials the entry assigned to the key.
To Next Page
Loading...
