Settings
74
Copyright © 2007 Nokia. All rights reserved.
Positioning
With the positioning service you can receive information
from service providers about local issues such as weather
and traffic conditions, based on the location of your
device (network service).
To enable a positioning method, select Positioning
methods, scroll to the positioning method, and select
Options > Enable. To stop using it, select Options >
Disable.
To define the positioning server access point, select
Positioning server > Access point and the desired access
point. Then select Server address, and enter the domain
name or URL address of the server.
Phone
Select Menu > Settings > Phone sett. > Phone and Call,
Call divert, Call barring, or Network.
Call
Send my caller ID (network service)—to set your phone
number to be displayed (Yes) or hidden (No) from the
person whom you are calling. The value may be set by your
service provider when you subscribe to the service (Set by
network).
Call waiting (network service)—to set the network to
notify you of a new incoming call while you have a call in
progress. To request the network to activate call waiting,
select Activate. To request the network to deactivate call
waiting, select Cancel. To check whether the function is
active, select Check status.
Reject call with SMS—to enable rejecting phone calls
with a text message. See “Answer or reject a voice call,”
p. 25.
Message text—to enter a text to be sent when you reject
a call with a text message
Image in video call—to select a still image to be shown
instead of the video when you deny video sending in a
video call
Automatic redial—to set the phone to make a maximum
of 10 attempts to connect the call after an unsuccessful
call attempt. Press the end key to stop automatic redialing.
Show call duration—to set the phone to display the call
duration during a call
Summary after call—to set the phone to briefly display
the approximate duration of the last call
Speed dialling > On—to set the phone to dial the numbers
assigned to the speed dialing keys, 2 to 9, by pressing and
holding the corresponding number key
Anykey answer > On—to answer an incoming call by
briefly pressing any key, except the right selection key,
volume keys, and the end key
To Next Page
Loading...
Need help?
General
