Connectivity
86
Copyright © 2007 Nokia. All rights reserved.
unique address of your phone, enter the code
*#2820# in the standby mode.
If you have searched for devices earlier, a list of the
devices that were found previously is shown first. To
start a new search, select More devices. If you switch
off the phone, the list of devices may be cleared, and
the device search needs to be started again before
sending data.
4 Select the device with which you want to connect.
5 Pair the devices
• If the other device requires pairing before data can
be transmitted, a tone sounds and you are asked to
enter a passcode.
• Create your own passcode (1–16 digits) and agree
with the owner of the other device to use the same
code. You do not have to memorize the passcode.
• After pairing, the device is saved to the Paired
devices view.
6 When the connection has been successfully
established, the note Sending data is displayed.
Data received using Bluetooth connection can be found in
Inbox in Messaging.
Paired devices view
Paired devices are indicated by in the search result list.
In the Bluetooth main view, scroll right to open a list of
paired devices.
Do not accept Bluetooth connections from sources you do
not trust.
To pair with a device, select Options > New paired device.
Select the device with which to pair. Exchange passcodes.
To cancel pairing, scroll to the device whose pairing you
want to cancel, and press the clear key. If you want to
cancel all pairings, select Options > Delete all.
To set a device to be authorized, scroll to the device, and
select Options > Set as authorised. Connections between
your phone and the authorized device can be made
without your knowledge. No separate acceptance or
authorization is needed. Use this status only for your own
devices to which others do not have access, for example,
your PC or devices that belong to someone you trust. is
added next to authorized devices in the Paired devices
view. If you select Set as unauthorised, each connection
request from the device must be accepted separately.
Receive data
When you receive data using Bluetooth technology, a tone
sounds, and you are asked if you want to accept the
message. If you accept, the item is placed in Inbox in
Messaging.
To Next Page
Loading...
Need help?
General
