Nokia 6250 - PUK Code (8 Digits); PUK2 Code (8 Digit); Keylock Code (4 Digit); Barring Password

©2000 Nokia Mobile Phones. All rights reserved.
Reference information
123
Reference information
PUK code (8 digits)
The PUK (Personal Unblocking Key) code is required to change a blocked PIN code. The PUK code may
be supplied with the SIM card. If not, contact your local service provider for the code. If you lose the
code, contact your service provider.
PUK2 code (8 digit)
The PUK2 code, supplied with some SIM cards, is required to change a blocked PIN2 code. If you lose
the code, contact your service provider.
Keylock code (4 digit)
You can use keylock code (Menu 4-3-2) to prevent the unauthorised use of your phone. The default
code is 0000.
Note: Before activating the keylock code make sure that the PIN code request is also set on.
Barring password
The barring password is needed when using the ‘Call Barring’ function. You obtain the password from
your service provider.
■ Battery information
Charging and discharging the battery
• Never charge the phone when the bottom connector or phone itself is wet or damp.
• Do not charge the phone in wet and damp conditions.