Always switch the device off and
disconnect the charger before removing
the battery.
Insert a memory card
The memory card may be supplied with
the device, and may already be inserted.
1 Remove the back cover of the
device.
2 Place the card in the slot with the
contact area facing down (1), and
push the card gently to lock it into
place (2).
3 Replace the back cover.
Charge the battery
Your battery has been partially charged
at the factory. If the device indicates a
low charge, do the following:
1 Connect the charger to a wall outlet.
2 Connect the charger to the device.
3 When the battery is fully charged,
disconnect the charger from the
device, then from the wall outlet.
12 Get started
© 2010 Nokia. All rights reserved.
To Next Page
Loading...
