devices, such as your compatible
headset or computer, or devices that
belong to someone you trust. If you
want to accept connection requests
from the other device separately every
time, select Set as unauthorised.
To use a Bluetooth audio accessory such
as a Bluetooth handsfree or headset,
you need to pair your device with the
accessory. For the passcode and further
instructions, see the accessory user
guide. To connect to the audio
accessory, switch on the accessory.
Some audio accessories connect
automatically to your device.
Otherwise, open the paired devices tab,
select the accessory and Options >
Connect to audio device.
Block devices
Select
> Settings >
Connectivity > Bluetooth.
To block a device from establishing a
Bluetooth connection to your device,
open the paired devices tab.
Select a device you want to block and
Options > Block.
To unblock a device, open the blocked
devices tab, and select Options >
Delete.
To unblock all blocked devices, select
Options > Delete all.
If you reject a pairing request from
another device, you are asked if you
want to block all future connection
requests from this device. If you accept
the query, the remote device is added to
the list of blocked devices.
Data cable
To avoid damaging the memory card or
corrupting data, do not disconnect the
USB data cable during a data transfer.
Transfer data between your device
and a PC
1 Insert a memory card in your device,
and connect the device to a
compatible PC with the USB data
cable. Always connect the data
cable first to your device, and then
to the other device or computer.
2 When the device asks which mode
to use, select Mass storage. In this
mode, you can see your device as a
Connectivity 67
© 2010 Nokia. All rights reserved.
To Next Page
Loading...
