If the device asks for the lock code, enter
the lock code, and select OK. The factory
setting for the lock code is 12345.
To set the correct time zone, time, and
date, select the country you are
presently in, then enter the local time
and date.
Antenna locations
Your device may have internal and
external antennas. Avoid touching the
antenna area unnecessarily while the
antenna is transmitting or receiving.
Contact with antennas affects the
communication quality and may cause
a higher power level during operation
and may reduce the battery life.
Configuration settings
Before you can use multimedia
messaging, e-mail, synchronisation,
streaming, and the browser, you must
have the proper configuration settings
in your device. Your device may
automatically configure browser,
multimedia messaging, access point,
and streaming settings based on the SIM
card used. If not, you can use the
Settings wizard application to configure
the settings. You may receive the
settings as a configuration message
that you can save to your device. For
more information on availability,
contact your service provider or nearest
authorised Nokia dealer.
When you receive a configuration
message, and the settings are not
automatically saved and activated, 1
new message is displayed. To save the
settings, select Show > Options >
Save. You may need to enter a PIN code
provided by the service provider.
Settings wizard
Select
> Settings > Sett. wizard.
Use Settings wizard to define e-mail and
connection settings. The availability of
the items in Settings wizard depends on
the features of the device, SIM card,
service provider, and the data in the
Settings wizard database.
14 Get started
© 2010 Nokia. All rights reserved.
To Next Page
Loading...
