Nokia 7190 - Page 127

[ 119 ]
Reference information
The phone won’t
dial a number using
voice dial.
You haven’t assigned a
voice tag to the number
you are trying to call.
See “Assign a voice
tag to a number” on
page 56.
You’re in an area with
an excessive amount of
background noise.
Go to a quieter area
to use voice dialing.
Whenever I connect
the DLR-3P cable to
my phone, it loses
power.
The AMPS module is
connected to your
phone.
Disconnect the
AMPS module or
DLR-3P cable from
your phone.
Whenever I connect
the AMPS module
to my phone, it
won’t power up.
The DLR-3P cable is
connected to your
phone.
Disconnect the
analog module or
DLR-3P cable from
your phone.
I can’t send infor-
mation using IR.
The device you are
communicating with
isn’t IrDA compliant.
Use a device that is
IrDA compliant.
The devices aren’t close
enough together.
Ensure your phone
and the device are
within 3 feet (90 cm)
of each other.
Problem Possible cause Possible solution