[ 8 ]
Install the battery
1
Align the battery with the slots on
back of the phone.
2
Gently slide the battery toward the
antenna until you hear a click.
Charge the battery
1
Plug the lead from the charger into the circular jack
on the end of your phone.
2
Plug the AC adapter into a standard wall outlet.
The phone beeps and the battery bar on screen
starts to scroll from bottom to top.
Note:
If the battery is empty, it will take a moment
for the bar on screen to begin scrolling.
Tip:
You can use the phone while it’s charging.
3
When the battery bar stops scrolling, the battery
is fully charged.
Note:
Charging time depends on the charger and battery. For example,
charging time for the BLS-2N battery with the ACP-7U charger is
about 2 hours.
4
Disconnect the charger from the phone and unplug it from the wall
outlet once the battery is fully charged.
To Next Page
Loading...
