Nokia 7190 - Page 80

[ 72 ]
Enable Module security
1
At the Start screen, press Menu.
2
Scroll until Settings appears and press the roller.
3
Scroll until Security settings appears and press the roller.
4
Scroll until Module security appears and press the roller.
5
Enter the five digit Module code (12345 is default) and press OK.
Change the Module code
1
At the Start screen, press Menu.
2
Scroll until Settings appears and press the roller.
3
Scroll until Security settings appears and press the roller.
4
Scroll until Change access codes appears and press the roller.
5
Scroll until Change module code appears and press the roller.
6
Enter the current module code and press OK.
7
Enter the new module code and press OK.
8
Enter the new module code again (for verification) and press OK.
Module code changed appears in the display.