Nokia 7210 SAS-M Configuration Guide

Interface Configuration
7210 SAS M, T, X, R6, R12, Mxp, S, Sx Interface Configuration Guide Page 283
• Specific Port Output Fields on page 287
• Detailed Port Output Fields on page 293
• Ethernet Output Fields on page 305
• Ethernet-Like Medium Statistics Output Fields on page 323
• Port Associations Output Fields on page 326
General Port Output Fields
Label Description
Port ID
The port ID configured or displayed in the slot/mda/port format.
Admin State
Up — The administrative state is up.
Down — The administrative state is down.
Phy Link
Yes — A physical link is present.
No — A physical link is not present.
Port State
Up — The port is physically present and has physical link present.
Down — The port is physically present but does not have a link.
Ghost — A port that is not physically present.
None — The port is in its initial creation state or about to be deleted.
Link Up — A port that is physically present and has physical link
present.
Link Down — A port that is physically present but does not have a
link.
Cfg MTU
The configured MTU.
Oper MTU
The negotiated size of the largest packet which can be sent on the port
specified in octets.
LAG ID
The LAG or multi-link trunk (MLT) that the port is assigned to.
Port Mode
network — The port is configured for transport network use.
access — The port is configured for service access.
Port Encap
Null — Ingress frames will not use tags or labels to delineate a ser-
vice.
dot1q — Ingress frames carry 802.1Q tags where each tag signifies
a different service.
QinQ — Encapsulation type specified for QinQ Access SAPs.
Port Type
The type of port or optics installed.

Nokia 7210 SAS-M Specifications

General

Brand	Nokia
Model	7210 SAS-M
Category	Cell Phone
Language	English