[ 158 ]
Note: The synchronization settings may differ from the service
settings required for xHTML browsing. After synchronizing, change
your Active service settings back to the previous ones if you want
to use other xHTML services later.
2 Mark the data to be synchronized. (See “Save settings manually” on
page 156 for more information.)
3 At the start screen, press Menu 12-5-1 (Connectivity > Synchronize
> Synchronize). Synchronization begins.
Depending on the type of connection you are using to synchronize
data, connecting or initializing messages may appear.
Note: Synchronizing for the first time or after an interrupted
synchronization may take time up to 30 minutes, if the phone book
or calendar are full.
STOP SYNCHRONIZATION
1 To stop synchronization press Quit or
i. The Quit synchronization?
message appears.
2 Press OK.
HANDLING CALLS DURING SYNCHRONIZATION
During synchronization, outgoing calls are not possible. Incoming calls
can still be received, and can be handled in one of the following ways:
• To reject the incoming call, press
i (synchronization continues)
• To answer the incoming call, press
h (synchronization is
interrupted and a Synchronization suspended message appears)
Note: Once the incoming call is ended, a Start synchronization
again? message appears. Selecting Yes starts synchronization over
again, from the beginning.
Synchronize from your PC
You can synchronize the data in your phone’s phone book and calendar to
correspond with the data of your PC by starting the synchronization from
your PC.
To Next Page
Loading...
