Nokia 7368 ISAM ONT BGW320-505 - Procedure

7368 ISAM ONT BGW320-505 Product Guide Replace an BGW320-505 indoor ONT
Issue: 01 3FE-47753-AAAA-TCZZA 43
5.5 Procedure
Use this procedure to replace an BGW320-505 indoor ONT.
1 Deactivate the ONT services at the P-OLT.
If you are using the SLID feature, this step is not required. The ONT and the services can
remain in service (IS).
i Use the RTRV-ONT command to verify the ONT status and th associated services.
Record the serial number or the SLID of the ONT displayed in the command output.
Example:
RTRV-ONT::ONT-1-1-1-1-1;
ii If the ONT is in service, place the ONT in OOS state.
Example:
ED-ONT::ONT-1-1-1-1-1;
2 Power down the unit by disconnecting the power cable; see Figure 6 for the power input.
Release 06.02.00b | October 2019 | Edition 01