Need help?Do you have a question about the Nokia XS-2426G-B and is the answer not in the manual?
General| GPON Ports | 1 |
|---|---|
| Gigabit Ethernet Ports | 4 |
| FXS Ports | 2 |
| Power over Ethernet | No |
| VLAN Support | Yes |
| Jumbo Frame Support | Yes |
| Operating Temperature | 0°C to 40°C |
| Humidity | 5% to 95% (non-condensing) |
| Wi-Fi Bands | 2.4GHz & 5GHz |
| Management | TR-069 |
| Power Supply | 12 V DC |
Explains safety statements, symbols, and their meanings.
Details compliance with TL 9000 and quality practices.
Explains where to find and download customer documentation.
Details safety instructions, including DANGER, WARNING, CAUTION boxes.
Lists compliance with European safety standards (EMC, EMI, ESD, etc.).
Provides electrical safety guidelines for ONT equipment.
Outlines safety procedures for handling ESD-sensitive equipment.
Details safety precautions related to laser hazards.
Details safety instructions, including DANGER, WARNING, CAUTION boxes.
Lists compliance with North American safety standards.
Provides electrical safety guidelines for ONT equipment.
Outlines safety procedures for handling ESD-sensitive equipment.
Lists part numbers and identification details for the XS-2426G-B ONT.
Provides a comprehensive overview of the XS-2426G-B ONT's capabilities.
Information on supported software and installation features for the ONT.
Details the supported interfaces and their respective capacities.
Explains the function and behavior of the ONT's LED indicators.
Lists the detailed technical specifications of the XS-2426G-B ONT.
Lists the standards the XS-2426G-B ONT complies with.
Outlines special considerations and limitations for the XS-2426G-B ONT.
Lists necessary items and conditions required before installation.
Specifies the tools needed for installing the ONT.
Provides critical safety precautions to follow before installing the unit.
Step-by-step guide for installing the XS-2426G-B indoor ONT.
Instructions for mounting the ONT on a wall using a bracket.
Lists necessary items and conditions required before replacing the ONT.
Specifies the tools needed for replacing the ONT.
Provides critical safety precautions to follow before replacing the unit.
Step-by-step guide for replacing the XS-2426G-B indoor ONT.
Provides an overview of the configuration chapter.
General GUI configuration steps for the ONT.
GUI configuration steps for the ONT in HGU mode.
Procedure to log in to the ONT's web-based GUI.
How to view the ONT's overview information page.
How to view detailed device information.
How to view the status of the Local Area Network.
How to view the status of the Wide Area Network.
How to view the WAN IPv6 connection status.
How to view Station (STA) information.
How to view information about neighboring Wi-Fi access points.
How to view home networking details.
How to view the status of the ONT's optics module.
How to view various system statistics.
How to view voice service information.
Overview for network configuration tasks.
Steps to configure the Local Area Network settings.
Steps to configure IPv6 settings for the LAN.
Steps to configure the Wide Area Network settings.
Steps to configure WAN DHCP options.
Steps to configure the 2.4GHz wireless network.
Steps to configure the 5GHz wireless network.
Steps to schedule wireless radio on/off times.
Steps to configure IP routing parameters.
Steps to configure Domain Name System settings.
Steps to configure TR-069 for remote management.
Steps to configure Generic Routing Encapsulation tunnels.
Steps to configure upstream traffic classifiers and policies.
Steps to configure Quality of Service parameters.
Overview for security configuration tasks.
Steps to configure the firewall.
Steps to configure the MAC address filter.
Steps to configure the IP address filter.
Steps to configure the URL filter for content blocking.
Steps to configure DMZ and Application Layer Gateway.
Steps to configure Access Control Lists (ACLs).
Overview for application configuration tasks.
Steps to configure port forwarding rules.
Steps to configure port triggering rules.
Steps to configure Dynamic DNS.
Steps to configure Network Time Protocol.
Steps to configure USB storage and printer settings.
Steps to configure UPnP and DLNA.
Overview for maintenance tasks.
Steps to change the ONT's password according to rules.
Steps to configure the Local Optical ID (LOID).
Steps to configure the Subscriber Logical ID (SLID).
Procedures for managing the device's status and settings.
Steps to back up the current ONT configuration.
Steps to restore a previously backed-up configuration.
Steps to upgrade the ONT's firmware.
Steps to reboot the ONT.
Steps to reset the ONT to its factory default settings.
Procedure to diagnose issues with WAN connections.
Steps to view system log files.
Overview of RG troubleshooting counters.
Guides on monitoring broadband connection performance and status.
Overview of the OMCI configuration chapter.
Explains the benefits of using configuration files over OMCI.
Lists the types of configuration files supported by the ONT.
Procedures for configuring ONTs using configuration files via OMCI.
To Next Page