• The first character cannot be a special character
• There are not enough character classes
1
Click Maintenance→Password from the left pane. The Password page displays.
2
Configure the following parameters:
Table 8-38 Password parameters
Field Description
Original Password Enter the current password.
New Password Enter the new password (must adhere to the password rules).
Re-enter password Re-enter the new password (must match the new password entered above exactly).
Prompt message Enter the password prompt message.
3
Click Save.
You can click
to update the displayed information.
END OF STEPS
8.47 Configuring LOID
1
Click Maintenance → LOID Config from the left pane. The LOID Config page displays.
Figure 8-42 Password page
Configure a XS-2426G-B indoor ONT
Maintenance
Configuring LOID
Nokia ONT
Review Review
© 2021 Nokia. Nokia Confidential Information
Use subject to agreed restrictions on disclosure and use.
3FE-49546-AAAA-TCZZA
December 2021
134 Issue 1
To Next Page
Loading...
