Need help?Do you have a question about the Nokia ONT XS-2426X-A and is the answer not in the manual?
General| Brand | Nokia |
|---|---|
| Model | ONT XS-2426X-A |
| Category | Network Hardware |
| Language | English |
Provides information about safety, features, functionality, ordering, installation, and maintenance.
Targets planners, administrators, operators, and maintenance personnel involved with ONTs.
Details safety statements, warnings, and cautions used throughout the manual.
Explains where to find expansions and descriptions of acronyms and initialisms.
Provides tables of feature and document changes applicable to this guide.
Details new features and document changes for BBD Release 22.01.
Describes safety instructions provided in customer documentation and on the equipment.
Explains the meaning and use of Danger, Warning, and Caution boxes.
Describes labels related to safety compliance and information on the ONT equipment.
Describes ONT compliance with European safety standards.
Provides electrical safety guidelines for the ONT equipment.
Advises against non-Nokia approved power supplies due to warranty and safety risks.
Provides guidelines for approved cables and outdoor installation requirements.
States earthing and bonding must comply with local electrical codes.
Details ESD sensitivity and required precautions for handling the ONT.
Provides instructions for laser hazards during installation, operation, and maintenance.
Classifies the ONT as a Class 1 laser product and shows related labels.
Specifies the maximum transmit optical output of the ONT as +9 dBm.
Describes laser operation and safety precautions for eye damage.
Provides recommendations to avoid condensation during temperature changes.
Describes environmental instructions and shows sample labels for the equipment.
Describes compliance with CRoHS standard for hazardous substances.
Details storage, transportation, and stationary use requirements.
Details compliance with EU RoHS Directive for hazardous substances.
Explains end-of-life disposal and recycling requirements based on EU directives.
Describes safety instructions and warning boxes for North American market.
Details various safety labels and compliance information for the ONT.
Describes ONT compliance with North American safety standards.
Lists compliance with FCC, GR-1089-CORE, and Canadian standards.
Mentions compliance with IEC6236-8 for Communication Service Equipment.
Lists GR-63-CORE, GR-487-CORE, GR-3108, and TP76200 standards.
Explains compliance with 21 CFR 1040.10 and CDRH Laser Safety cautions.
Mentions compliance with ITU Recommendation K.21.
Provides warnings and precautions for laser hazards during operation.
Shows sample labels related to laser product classification and warning.
Classifies the ONT as a Class 1 laser product.
Specifies the maximum transmit optical output of the ONT as +5 dBm.
Describes laser operation and safety precautions for eye damage.
Provides electrical safety guidelines for the ONT equipment.
Advises against non-Nokia approved power supplies due to warranty and safety risks.
Provides guidelines for approved cables and outdoor installation requirements.
States earthing and bonding must comply with NEC article 250 or local codes.
Details ESD sensitivity and required precautions for handling the ONT.
Provides recommendations to avoid condensation during temperature changes.
Provides an overview of the XS-2426X-A unit data sheet.
Lists part numbers and identification information for the XS-2426X-A indoor ONT.
Describes the ONT's function as a subscriber interface and its triple play capabilities.
Lists TR-069 features supported by the ONT for remote management.
Refers to chapters for installation and other guides for features.
Describes supported interfaces and their capacities for the ONT.
Shows physical connections and components of the ONT.
Shows the XS-2426X-A indoor ONT LEDs and their descriptions.
Lists the physical specifications for XS-2426X-A indoor ONTs.
Lists the dimension data specifications for the ONT.
Lists the power consumption specifications for the ONT.
Lists the environmental specifications for the ONT.
Lists capacity for GEM ports and T-CONTs.
Identifies supported performance monitoring statistics for the ONT.
Shows the functional blocks of the XS-2426X-A indoor ONT.
Lists standards compliance for health, safety, environmental, and wireless.
Lists the US responsible party for the ONT.
Declares compliance with EU directives on energy-related product standby modes.
Provides FCC compliance statement regarding interference and operation.
States compliance with FCC radiation exposure limits and operating conditions.
Lists special considerations for the XS-2426X-A package P ONT.
Describes the ONT's Wi-Fi service and its compliance with IEEE standards.
Lists considerations and limitations for Package P XS-2426X-A ONTs.
Provides an overview of the installation chapter.
States this chapter provides steps to install the ONT.
Describes mounting and cabling steps for installation.
Lists items needed before starting the installation.
Lists the tools required for the installation.
Provides critical safety information before installing the unit.
Details the step-by-step procedure to install the ONT.
Provides steps to mount the ONT on a wall using a bracket.
Provides an overview of the replacement chapter.
States this chapter provides steps to replace the ONT.
Describes mounting and cabling steps for replacement.
Lists items needed before starting the replacement.
Lists the tools required for the replacement.
Provides critical safety information before replacing the unit.
Details the step-by-step procedure to replace the ONT.
Provides an overview of the configuration chapter.
Covers GUI configuration tasks including login and overview.
Refers to OLT or other guides for software configuration.
Details using the web-based GUI in HGU mode.
Provides steps to log in to the ONT's web-based GUI.
Describes how to view the overview page in the GUI.
Describes procedures to view device and connection status on the ONT.
Explains how to view LAN status parameters in the GUI.
Explains how to view WAN status parameters in the GUI.
Explains how to view WAN IPv6 status parameters in the GUI.
Details how to view STA (Station) information parameters.
Explains how to view neighboring AP information.
Describes how to view home networking information.
Details how to view optics module status parameters.
Explains how to view LAN, WAN, or WLAN statistics.
Details how to view voice information parameters.
Describes network configuration tasks supported by the ONT.
Provides steps to configure LAN settings in the GUI.
Details steps to configure LAN IPv6 settings.
Provides steps to configure WAN settings in the GUI.
Details steps to configure WAN DHCP parameters.
Explains how to configure wireless settings for the 2.4GHz band.
Explains how to configure wireless settings for the 5GHz band.
Details how to configure wireless scheduling to turn off Wi-Fi.
Provides steps to configure IP routing parameters.
Details how to configure DNS settings.
Explains how to configure TR-069 settings for remote management.
Provides steps to configure GRE tunnel settings.
Details creating policies, classifiers, and rules for upstream traffic.
Explains how to configure Quality of Service (QoS) settings.
Describes security configuration tasks supported by the ONT.
Provides steps to configure firewall settings.
Details how to configure MAC address filtering.
Explains how to configure IP address filtering.
Details how to configure URL filtering for web access.
Explains how to configure DMZ and Application Layer Gateway settings.
Details how to set up parental control and family profiles.
Provides steps to configure access control levels (ACL).
Describes application configuration tasks supported by the ONT.
Provides steps to configure port forwarding rules.
Details how to configure port triggering.
Explains how to configure Dynamic DNS settings.
Details how to configure Network Time Protocol settings.
Explains how to configure USB settings for storage devices.
Details how to enable UPnP and DLNA for network discovery.
Describes maintenance tasks supported by the ONT.
Details the rules and procedure for configuring the ONT password.
Provides steps to configure the LOID (Logical ID).
Details how to configure the SLID (Service Level Identifier).
Explains how to manage device settings like hostname and alias.
Provides steps to export the ONT configuration to a backup file.
Details how to import a saved backup file to restore the ONT.
Explains the procedure to upgrade the ONT firmware.
Details the procedure to reboot the ONT.
Provides steps to reset the ONT to its factory default settings.
Explains how to diagnose WAN connections using ping and traceroute.
Details how to view and filter log files for events.
Describes the GUI procedures for RG troubleshooting counters.
Explains how to monitor broadband connection performance using counters.
Describes using configuration files over OMCI to configure ONTs.
Explains the benefits of using configuration files for ONT setup.
Describes the types of configuration files supported by the ONT.
Details the procedure for configuring ONTs via OMCI using files.
Details using legacy methods to configure ONTs with files.
Explains configuring ONTs via OMCI using files.
To Next Page