2
Configure the following parameters:
Table 8-43 RG Troubleshooting Counters parameters
Field Description
WAN Connection List Select a WAN connection from the list.
WAN Status Indicates whether the broadband connections is active (UP) or not (DOWN).
US Throughput This test is used to determine the upstream throughput/speed.
Click US Speed Test to specify the time for the upstream test.
The default is weekly, performed at idle to a public server.
DS Throughput This test is used to determine the downstream throughput/speed.
Click DS Speed Test to specify the time for the downstream test.
The default is weekly, performed at idle to a public server.
US Packet Loss Displays the number of upstream packages lost.
DS Packet Loss Displays the number of downstream packages lost.
Latency This test is used to determine the lowest round-trip time in milliseconds by pinging the target
server multiple times.
Click Latency Test to specify the time for the test.
The default is weekly, performed at idle to a public server.
DNS Response Time This test is used to determine the lowest round-trip time in milliseconds by sending a request to
the target DNS server.
Click DNS Response Test to specify the time for the test.
The default is weekly, performed at idle to a public server.
Port mirrors
Source port Select a source port from the list.
Dest port Select a destination port from the list.
Direction Select a direction from the list ( upstream or downstream).
Status Select a status from the list
3
Click Save.
You can click
END OF STEPS
Configure a XS-2426X-A indoor ONT
RG Troubleshooting Counters
Viewing Residential Gateway (RG) troubleshooting counters
Nokia ONT
Review Review
© 2021 Nokia. Nokia Confidential Information
Use subject to agreed restrictions on disclosure and use.
3FE-49546-AAAA-TCZZA
December 2021
154 Issue 1
To Next Page
Loading...
Need help?
General
