Nokia ONT XS-2426X-A - Figure 7-1 XS-2426 X-A Indoor ONT Connections

1
Deactivate the ONT services at the P-OLT.
If you are using the SLID feature, this step is not required. The ONT and the services can
remain in service (IS).
a. Use the RTRV-ONT command to verify the ONT status and th associated services. Record
the serial number or the SLID of the ONT displayed in the command output.
Example:
RTRV-ONT::ONT-1-1-1-1-1;
b. If the ONT is in service, place the ONT in OOS state.
Example:
ED-ONT::ONT-1-1-1-1-1;
2
If used, disable the Wi-Fi service by pressing the WLAN button; see the following figure for the
location of the WLAN button.
Figure 7-1 XS-2426X-A indoor ONT connections
37135
WPS
WLAN
ON/OF
F
P
O
W
ER
USB
L
A
N1
L
A
N2
L
A
N3
10G
E
TEL2
TEL1
Ethernet
ports (4)
(RJ-45)
Wi-Fi
security/
on/off buttons
On/off
button
Power
USB
POTS
ports (2)
(RJ-11)
Replace a XS-2426X-A indoor ONT
Procedure
Nokia ONT
Review Review
December 2021
Issue 1 75
© 2021 Nokia. Nokia Confidential Information
Use subject to agreed restrictions on disclosure and use.
3FE-49546-AAAA-TCZZA