Nokia ONT XS-2426X-A - Configuring DMZ and ALG

8.36 Configuring DMZ and ALG
1
Click Security→DMZ and ALG from the left pane. The DMZ and ALG page displays.
2
Configure the following parameters:
Table 8-29 ALG parameters
Field Description
ALG Configuration Select the checkboxes to enable the protocols to be supported by the ALG: FTP, TFTP, SIP, H323,
RTSP, L2TP, IPSEC, PPTP.
3
Click Save ALG.
4
Configure the following parameters:
Table 8-30 DMZ parameters
Field Description
WAN connection list Select a WAN connection from the list.
Enable DMZ Click to enable DMZ on the selected WAN connection.
DMZ IP Address Select Custom Settings and enter the DMZ IP address or select the IP address of a
connected device from the list.
Figure 8-34 DMZ and ALG page
Configure a XS-2426X-A indoor ONT
Security configuration
Configuring DMZ and ALG
Nokia ONT
Review Review
© 2021 Nokia. Nokia Confidential Information
Use subject to agreed restrictions on disclosure and use.
3FE-49546-AAAA-TCZZA
December 2021
128 Issue 1